Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Lakewood, CA
Garage door installation in Lakewood usually means one of two things: swapping out a 1950s wood door that’s finally given up, or retrofitting a narrow original opening to fit a modern door and opener. Most of the homes in Lakewood went up during the postwar building boom, and their garages were framed for cars that were a foot narrower than today’s SUVs. We’re a brand-agnostic shop, so when a LiftMaster rail won’t clear an old header or a Chamberlain opener needs a reinforced mounting point, our technicians already know the fix before the parts come off the truck. Call (877) 752-4135 when you’re ready to talk through your options.
Why Lakewood Homes Are Different
Lakewood is one of America’s first planned postwar suburbs. The 1950s tract homes off Del Amo Boulevard and Carson Street were built with attached or detached single-car garages sized for narrow sedans, which means nearly every garage door job here involves retrofitting an undersized original opening. We’re not just hanging a new door on standard rough framing; we’re reinforcing headers, re-pouring stem walls where needed, and matching track geometry to a space that was never designed for anything wider than about eight feet.
The original Lakewood Plan builds also used lightweight wood doors with early coil springs, and sixty or seventy years of use have left many of them bowed, rotted along the bottom rail, or sagging on worn hinges. When we replace those, we often find the header is a single 2×4 laid flat, which is nowhere near enough for a modern steel door. Reinforcement is part of the job, not an optional add-on.
Climate matters here too. Lakewood doesn’t get snow or freeze cycles, but the salt air from the coast works its way into springs, tracks, and hinge pins. Summer heat expands metal, and Santa Ana winds put real stress on lightweight doors with worn rollers. A door that holds fine on a calm day can bind or jump track when the wind funnels down Bixby Knolls way. That’s why we check balance and roller wear differently in Lakewood than we would in, say, the Inland Empire.
Styles & brands we work with
Our Main Lakewood Services
Two calls account for most of what we do in Lakewood: doors that won’t open or close safely, and openers that make noise but don’t move the door. Both have their own dedicated Lakewood pages with full detail.
Garage Door Repair in Lakewood
Broken springs, snapped cables, snapped rollers, and doors off their tracks are the usual suspects in Lakewood’s 1950s-era garages. Salt air accelerates spring corrosion, and when a spring lets go on a single-car door, the door usually refuses to lift at all. We carry springs, cables, rollers, and hinges for the brands already installed across the 90712 and 90713 ZIP codes, so most repairs happen in one visit. Full detail lives on the Garage Door Repair in Lakewood page.
Garage Door Opener Repair in Lakewood
Older Lakewood homes often have opener motors from the 1990s or early 2000s, mounted to ceilings that were never braced for them. When a Genie or Chamberlain opener grinds, reverses, or refuses to respond, the cause can be a stripped gear, a dead logic board, or simply a door out of balance. Our techs diagnose the actual fault, not the symptom. Details, pricing, and same-day response are on the Garage Door Opener Repair in Lakewood page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Lakewood
Installing a garage door in Lakewood almost always starts with the opening, not the door. The original 1950s rough openings are frequently narrower than today’s standard eight feet, and the headers above them were built with less material than modern code requires. Our installation work handles the full project: reinforcing the header, setting new track, and installing a door and opener sized for the way Lakewood homeowners actually park now. We handle Garage Door Installation from first measure to final trim.
For most Lakewood homes, that means a single visit to measure and inspect the opening, a written quote with the full scope, and a scheduled install day where we bring everything needed. No second contractor, no handoff.
Garage Door Replacement
Signs you need it
A door with rot along the bottom rail, panels that flex when you press on them, or a track system that no longer holds adjustment is past repair in most Lakewood garages.
What it costs in Lakewood
New garage door installation in Lakewood runs $700 – $2200 depending on size, material, and whether the opening needs header or framing work.
How we do it
We remove the old door and hardware, inspect and reinforce the header and jambs, then set the new door, tracks, springs, and weather seal in one scheduled visit.
Garage Door Installation Service
Signs you need it
If your current door is original to a 1950s Lakewood tract home and still swings on strap hinges or a single extension spring, a modern installation changes how the whole garage works.
What it costs in Lakewood
Full door installation service in Lakewood starts at $700 and tops out around $2200, including new tracks and hardware on a reinforced opening.
How we do it
We confirm the opening dimensions, pull any permit the city requires for structural work, then install the door, opener mount, and safety sensors to current code.
What Garage Door Installation Costs in Lakewood
| Item | Typical range in Lakewood |
|---|---|
| New door installation | $700 – $2200 |
| Panel replacement | $250 – $500 |
| Opener installation | $250 – $550 |
Can you install a wider door on a 1950s Lakewood opening?
Usually yes, but it depends on the header. Original Lakewood Plan openings often have a single flat 2×4 header that must be reinforced or replaced before we can widen the rough opening for a modern eight-foot door. We inspect and quote that work before any installation starts.
How long does a Lakewood garage door installation take?
Most residential door replacements take one day on site. If we’re reinforcing a header or resizing a rough opening, plan for a second day for structural work and inspection. We confirm the schedule in writing before we start.
Brands We Service in Lakewood
Ranger Garage Door Service works on the brands Lakewood homeowners already have: Raynor, LiftMaster, Chamberlain, and Genie. We keep common springs, boards, and rail components local so most repairs don’t wait on a parts order. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Lakewood, CA
| Service | Typical range in Lakewood |
|---|---|
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
What pushes a Lakewood job toward the top of those ranges is usually the opening itself. Original 1950s headers and narrow rough openings add reinforcement time and material, and doors with advanced corrosion from salt air sometimes need new track instead of a realignment. Whatever the number, we write it down and you approve it before any work starts. No surprises on the invoice.
Neighborhoods We Serve in Lakewood
We cover the full span of Lakewood, from the central tract home grid to the pockets of newer builds on the edges of the city.
- Lakewood Park
- Lakewood Mutual
- Mayfair area
- Lakewood Estates
- Candlewood
Most Lakewood calls get a technician out the same day for repairs, often within a couple of hours depending on when you call. Installations are scheduled.
Service Area – Cities Near Lakewood
Ranger Garage Door Service runs calls throughout the nearby area. If you’re across the 605 in Bellflower, CA, over by the Long Beach border near Hawaiian Gardens, CA, up toward the 91 in Artesia, CA, or east into Cerritos, CA, the same crew covers your door.
Serving Lakewood, CA — Our Local Coverage Area
We’re based in the Lakewood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Lakewood
If the job is a straight door swap with no structural changes, Lakewood typically doesn’t require a permit. When we’re reinforcing a header, widening an opening, or altering framing on an original 1950s garage, the city will likely want plans or an inspection. We handle that paperwork as part of the quote.
For repair calls, we usually reach Lakewood homes the same day, often within two to three hours. Installation visits are scheduled for your chosen day. Call (877) 752-4135 and we’ll give you a real window, not a vague one.
Yes. We cover all of Lakewood’s ZIP codes: 90712, 90713, 90714, and 90715. Same rates, same response, same crew across the whole city.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lakewood Customers Say
"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
— Amanda Delaney"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
— Gilbert Flores"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
— Alejandro Salazar